What is Moisture Mapping?

Moisture mapping involves the identification and location of moisture sources within a structure.

Performed using specialized equipment, this process enables the efficient and accurate detection of moisture, facilitating prompt remediation to prevent structural damage and improve indoor air quality.

Moisture Mapping and Detection Methods

Various methods are employed for moisture mapping, each with unique advantages.

1. Infrared Thermography

Thermal imaging cameras detect temperature variations, revealing areas of moisture accumulation.

Wet surfaces emit lower infrared radiation compared to dry surfaces, allowing for the identification of moisture sources.

2. Electrical Impedance Scanning

Electrical impedance scanners measure the electrical resistance of a material.

Increased moisture content reduces electrical resistance, enabling the detection of moisture distribution.

3. Microwave Scanning

Microwave scanners emit electromagnetic waves that interact with moisture molecules.

Moisture absorption causes a change in the wave’s frequency, indicating the presence of moisture.

What is a Moisture Test in a House?

A moisture test in a house involves the assessment of moisture levels within the structure.

This test can be performed using various methods, including:

• Relative Humidity Measurement: Measures the amount of moisture in the air.
• Surface Moisture Measurement: Measures the moisture content near the surface of building materials.
• Penetration Moisture Measurement: Measures the moisture content deeper within building materials.

Moisture tests aid in identifying potential moisture problems, such as leaks, condensation, or excessive humidity, allowing for timely interventions.